Avery Dennison 9450 RASCAL - Manual (Page 31)

Some items have predefined or default values already
displayed. Some items already have values entered. If you
press ENTER or one of the arrow keys when a field already
contains a value, the value stays the same.
3. When the highlighted bar moves to a particular item, enter
the value for that item. Press ENTER. The highlighted bar
moves to the next item.
NOTE: You may also use the Down Arrow key to move
to the next item. Use the Up Arrow key to move
to a previous item if you need to change the value
entered.
4. Enter a value at each prompt and press ENTER. Refer to
Appendix B, "Format Specification Data" for valid values.
When you are finished entering data, you will see:
ALL DATA IS CORRECT. PRESS ENTER TO
BEGIN ADDING FIELDS. PRESS ’C’ TO MAKE
CHANGES. PRESS ESC TO NOT CREATE THE
FORMAT.
5. To make changes to any data item, press C. The
highlighted bar reappears at the first item. You can move
the bar to an item and change it. Press ESC when you are
finished making changes.
If you decide you do not want to add the new field or the
new format, press ESC again. The field is not added and
you return to the Edit Format Menu. Press ENTER to
begin adding fields.
4. Designing Formats
4-3