Avery Dennison 9450 RASCAL - Manual (Page 16)

You will see:
SELECT OPTION:
1) LPT1 PORT IS OPEN
2) LPT2 PORT IS OPEN
3) LPT3 PORT IS OPEN
4) LPT4 PORT IS OPEN
>
4. Select an LPT port that is open on your system. Make
sure that no printer or other device is attached to it. (The
software uses an LPT port during the printing process).
Press ENTER. You will see:
Enter letter of drive to be used for
labels:>
5. Enter the letter of the drive on which to save your labels.
No colon is needed (for example, type C).
You will see:
SELECT OPTION:
1) ENGLISH
2) METRIC
>>>
9450 User’s Manual
2-6