Avery Dennison 9450 RASCAL - Manual (Page 25)

Starting the 9450 Software
To start the software:
1. Type:
run9450
and press ENTER.
NOTE: The RUN9450 command resets your computer’s
communication ports. These ports remain at the
values set by the 9450 software until the
computer is reset. To return your ports to their
original values, reboot your computer or run a
DOS MODE command. See your computer’s
manual for more information on operating system
functions.
The 9450 logo is displayed on the screen.
2. Press any key to access the Main Menu.
3. Using the 9450 Label Design Software
3-3