Avery Dennison 9450 RASCAL - Manual (Page 63)

Selecting the Print Contrast
This function enables you to select the contrast percentage of
the print on the label.
1. Enter C at the Online Commands Menu.
You will see:
2. From this screen, you can darken or lighten the contrast.
•
To darken the contrast, press D. Then, enter the
percentage darker that you want the label to print. You
can enter a value up to 35% (do not enter the percent
symbol). Press ENTER.
•
To lighten the contrast, press L. Then, enter the
percentage lighter that you want the label to print. You
can enter a value as low as 15% (do not enter the
percent symbol).
7. Online Commands
7-3