Avery Dennison 9450 RASCAL - Manual (Page 18)

8. Enter Y to bring up the Font Manager screen and add new
fonts, delete fonts, or replace fonts. Enter N if you do not
want to change your fonts.
If you entered Y, you will see:
Moving Within the Font Manager
You can use either the keyboard or the mouse to get around in
the Font Manager screens. To select an item when using a
mouse, move the cursor onto the object and then press the left
mouse button.
If you are using a keyboard, use the TAB key to move from box
to box, or press the hot key that corresponds to the box you
want to move to. Use the Up Arrow and Down Arrow keys to
move to the item you want to select, and then press the
Spacebar to select the item.
Adding Fonts and Point Sizes
To add a new font and point size to the list of selected fonts,
follow these steps:
1. Select the font you want to add from the Available Fonts
list box.
2. From the Points list box, select the point size you want the
new font to be.
3. Select the library number for the new font in the Selected
Fonts box.
9450 User’s Manual
2-8