Avery Dennison ALS 104 - Manual (Page 32)

28
3 B
EFORE OPERATION
3.2 I
NSERTING LABEL MATERIAL
ALS
104
GB
Threading the label roll at the dispensing
edge
£ Unroll around 1 m of label strip and remove the
labels from it.
£ Pass the backing paper around the first deflection
roller [34A] and through the slot in the sensor [34B].
£ Feed the backing paper under the pressure roller
[34C] to the dispensing plate [34D].
£ Feed the backing paper around the dispensing plate
to the second deflection roller [34E].
[34] Path of the label strip near the edge of the dispenser.
A 1st deflection roller
B Label sensor
C Pressure roller
D Dispensing plate
E 2nd deflection roller
C
A
B
D
E