2 inserting label material, 1 prerequisites, 3 . 2 i n s e r t i n g l a b e l m a t e r i a l – Avery Dennison ALS 104 User Manual

Page 29: Als 104 gb

3.2 I

NSERTING

LABEL

MATERIAL

ALS

104

3.2.1

Prerequisites

The label dispenser is turned off at the main switch
– Standard machine: switch set to “O” [28A]
– Machine with dust/splash guard: switch does not

Check that the safety installations are working
properly.

Inspect the machinery for any visible damage.
Report any ascertained defects immediately.

Remove any unnecessary materials and objects
from the operating area of the unit.

Ensure that only authorised persons are within the
operating range of the machine.

Use the required personal protective equipment
correctly; forexample, wear a hairnet, safety
glasses.

[28] Main switch (A) on the housing.

[29] Main switch on ALS 104 with dust/splash guard option.

3.2

INSERTING LABEL MATERIAL