Avery Dennison ALS 104 - Manual (Page 27)

23
3 B
EFORE OPERATION
3.1 E
LECTRICAL CONNECTIONS
ALS
104
GB
3.1.1 Power supply standard
machine
WARNING!
This machine operates using mains voltage!
Touching live electrical parts may expose
you to hazardous electrical currents and
may lead to burns.
£ Make sure that the unit is switched off
before connecting the power cable.
£ Only operate the unit with mains voltage
set in the fuse insert.
£ Ensure that the unit is set to receive the
mains voltage supplied by your electricity
provider.
£ Only connect the unit to a grounded
power socket fitted to authorised
standards.
£ The power cable should not be more than
3 m long.
The device is only completely disconnected
from the mains if the power cableis
unplugged. Therefore:
£ Make sure the power supply socket is
accessible.
£ In case of emergency, switch off the
device and disconnect the power cable!
Checking the power supply setting
The ALS 104 is suitable for operation with a
power supply of 230 V (AC) or 115 V (AC).
If you are unsure of what mains voltage your lo-
cal electricity supplier provides, refer to a qual-
ified service technician.
£ Check whether the right voltage is set in the
display of the fuse insert [25A].
Only a qualified service technician is allowed to
change the power supply setting.
You can find further information for performing
this operation in the service manual.
[25] Voltage display on the fuse insert (showing 230 V here).
A
3
B E F O R E O P E R A T I O N
3.1
ELECTRICAL CONNECTIONS