beautypg.com

Connecting the power cable, 2 power supply with dust/splash guard option, 3 connecting sensors – Avery Dennison ALS 104 User Manual

Page 28: 2 power supply with dust/splash guard option 24, Als 104 gb

background image

24

3

B

EFORE

OPERATION

3.1 E

LECTRICAL

CONNECTIONS

ALS

104

GB

Connecting the power cable.

£

Ensure that power switch [26A] is set to “O” (off).

£

Using the supplied power cable, plug the ALS 104
into a socket connected to the mains supply.

3.1.2

Power supply with dust/splash
guard option

ALS 104 labeller with dust/splash guard option
(IP65) may only be connected by qualified ser-
vice technicians.

3.1.3

Connecting sensors

£

Check whether the required sensors are connected
[27] before turning on the ALS 104.

The minimum required sensors:
– Label sensor (installation location: dispensing edge)
– Product sensor (installation location: conveyor belt)

You have the option of fitting additional sensors as well:
– Speed sensor (required for speed adaption)
– Outer diameter checking sensor (provides advance

warning of the end of a label roll)

You can find further information regarding suit-
able sensor types, pin assignments, and the
like in the service manual.

[26] Power cable (B) plugged in.

B

A

[27] Sensor connectors:

A Product sensor
B Label sensor
C Optional: Speed sensor
D Optional: Roll diameter (RD) sensor

B

A

C

D