Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 48)

4-8 LNT Programmer’s Manual
D e f i n i n g t h e G S 1 D at a B a r O p t i o n s T ag ( O p t i o n a l )
Use the Options tag to define GS1 DataBar-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density, type, sepheight, and segmentwidth.
Syntax
density Bar code density. Options: 2 to 8 as shown belo w. The default is 2.
Density Selector Narrow Element Width in Dots/mils
2 2 / 9.9
3 3 / 14.8
4 4 / 19.7
5 5 / 24.6
6 6 / 29.6
7 7 / 34.5
8 8 / 39.4
type Selects the type of GS1 DataBar bar code. The def ault is 1. Options:
1 GS1 Data Bar 14
2 GS1 Data Bar 14 Truncate d
3 GS1 Data Bar 14 Stacked
4 GS1 Data Bar 14 Stacked Omni-directional
5 GS1 Data Bar Limited
6 GS1 Data Bar E xpanded
7 UPCA
8 UPCE
9 EAN13
10 EAN8
11 UCC/ EAN128 and CC A /B
12 UCC/ EAN128 and CC C
sepheight The height of the separat or bet ween the linear bar code and the 2D bar code.
The default is 1. The val ue is either 1 or 2.
segmentwidth The width of the individua l segments for bar code <types> 1 to 6 above. The
default is 22. The range i s even numbers bet ween 2 and 22.
Example
Creates a GS1 DataBar 14 Stacked bar code with a density of 4 and sets the segment width to
8.