Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 34)

3-14 LNT Programmer’s Manual
Example
Creates a 0.5-inch horizontal line beginning at 0.25 inches and ending at 0.75 inches on the
y-axis at 0.15 inches.
Defining the Thickness Tag (Required)
The Thickness tag defines the line thickness.
Valid values include: An integer or float (in selected units).
It contains the following attribute: units.
Syntax
value
units Unit of measure. Options:
Inches Inches
MM Millimeters
Pi xels Pi xels (default)
Example
0.10
Defines a line 0.10 inches thick.