Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 44)

4-4 LNT Programmer’s Manual
D e f i n i n g t h e Co d e 9 3 O p t i o n s T a g ( O p t i o n al )
Use the Options tag to define Code 93-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density and narrowbar.
Syntax
density Bar code density. Options: 3, 4, 5, 7, and 10 as shown belo w. The default is
7
Density
Selector
Density
(% or cpi)
Narrow Element Width
in Dots/Mils
3 3.7 6 / 29.6
4 4.5 5 / 24.6
5 5.6 4 / 19.7
7 7.5 3 / 14.8
10 11.2 2 / 9.9
narrowbar Use the density table abo ve. Using a non-standard value may produce
unreadable bar codes. Define in Pi xels.
Example
Creates a Code 93 bar code with a density of 5 and does not specify a narrow bar value.
D e f i n i n g t h e Co d e 1 2 8 O p t i o n s T ag ( O p t i o n al )
Use the Options tag to define Code 128-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density and narrowbar.
Syntax
density Bar code density. Options: 4, 6, 8, and 20 as shown belo w. The default is 8.
Density
Selector
Density
(% or cpi)
Narrow Element Width
in Dots/mils
20 3.5/7.0 5/24.6
4 4.4/8.7 4/19.7
6 5.8/11.7 3/14.8
8 8.7/17.5 2/9.9
narrowbar Use the density table abo ve. Using a non-standard value may produce
unreadable bar codes. Define in Pi xels.
Example
Creates a Code 128 bar code with a density of 6 and does not specify a narrow bar value.