Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 42)

4-2 LNT Programmer’s Manual
D e f i n i n g t h e Co d ab a r O p t i o n s T a g ( O p t i o n al )
Use the Options tag to define Codabar-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density, narrowbar, widebar, narrowspace, widespace, and
interchargap.
Syntax
widespace=”value” interchargap=”value” />
density Bar code density. Options: 2 to 9 as shown belo w. The default is 8.
Density
Selector
Density
(% or cpi)
Narrow Element Width
in Dots/Mils
Narrow to Wide
Ratio
2 2.1 8 /39.4 1:3.0
3 3.0 6 / 29.6 1:2.5
4 4.6 4 / 19.7 1:2.5
5 5.1 4 / 19.7 1:2.0
7 8.4 2 / 9.9 1:3.0
8 9.2 2 / 9.9 1:2.5
9 10.1 2 / 9.9 1:2.0
narrowbar
widebar
narrow space
wide space
Use the density table above. Using a non-standard value may produce
unreadable bar codes. Define in Pixels.
interchargap The inter character gap b etween t wo character repr esentations. This is usually
defined the same as narrowspace. De fine in Pi xel s.
Example
Creates a Codabar bar code with a density of 4 and an intercharacter gap of 1.
D e f i n i n g t h e Co d e 1 6 K O p t i o n s T ag ( O p t i o n al )
Use the Options tag to define Code 16K-specific information.
Valid values include: a 32-bit unsigned decimal number.
It contains the following attributes: density and subbarheight.
Syntax
density Bar code density. Options: 4, 6, 8, or 20 as sho wn below. The default is 8.
Density
Selector
Density
(% or cpi)
Narrow Element Width
in Dots/mils
20 3.5/7.0 5/24.6
4 4.4/8.7 4/19.7
6 5.8/11.7 3/14.8
8 8.7/17.5 2/9.9
subbarheight The height of each ro w of bars. Define in Pi xels.
Example
Creates a Code 16K bar code with a density of 6 and does not specify a subbarheight.