Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 35)

Chapter 3
MOTLoad Firmware Package User’s Manual (6806800C24D) 35
MOTLoad Commands
3.1 Overview
This chapter lists the current valid MOTLoad commands. The remainder of the chapter
describes each command in detail.
3.1.1 MOTLoad Command List
The following table provides a list of all current MOTLoad commands. Products supported by
MOTLoad may or may not employ the full command set. Typing help at the MOTLoad
command prompt displays all commands supported by MOTLoad for a given product.
Note The command prompt designation for this manual is MOTLoad; however, the command
prompt for your specific version of MOTLoad is the product designator for your particular
board, for example, MVME6100, MVME5500.
Table 3-1 MOTLoad Commands
Command Description
as
One-Line Instruction Assembler
bcb bch bcw
Block Compare Byte/Halfword/Word
bdTempShow
Display Current Board Temperature
bfb bfh bfw
Block Fill Byte/Halfword/Word
blkCp
Block Copy
blkFmt
Block Format
blkRd
Block Read
blkShow
Block Show Device Configuration Data
blkVe
Block Verify
blkWr
Block Write
bmb bmh bmw
Block Move Byte/Halfword/Word
br
Assign/Delete/Display User-Program Break-Points
bsb bsh bsw
Block Search Byte/Halfword/Word
bvb bvh bvw
Block Verify Byte/Halfword/Word