Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 164)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 164
3.1.82 stl
Name
stl—displays all symbol table entries that match the name argument supplied by the user.
Synopsis
stl [name]
Output Definitions:
B = Built-In Symbol Table Entry
D = Dynamic Symbol Table Entry
U = User-Defined Symbol Table Entry
Note: Symbol table entries are displayed with either B = .bss, D = .data,
and T = .text
Parameters
The name argument is the name of the MOTLoad symbol being searched.
Example
The following example indicates a typical display when using the stl command:
MOTLoad> stl testRam
B:0015AE80 T testRamEccMonitor
B:0015F3E8 T testRam
B:0015F56C T testRamAddressing
B:0015F614 T testRamAlternating
B:0015F6BC T testRamBitToggle
B:0015F764 T testRamBounce
B:0015F80C T testRamCodeCopy
B:0015F8D8 T testRamMarch
B:0015F980 T testRamPatterns
B:0015FA28 T testRamPermutations
B:0015FAD0 T testRamQuick
B:0015FB78 T testRamRandom
B:001811C8 D testRamEccMonitorFullExplanation