Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 208)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 208
3.1.116 testWatchdogTimer
Name
testWatchdogTimer—tests the watchdog timer device. The test application checks for timer
accuracy allowing a tolerance of 30 microseconds. Both interrupt and reset modes are
validated through this test.
Synopsis
testWatchdogTimer -d [-r] [-t] [-v]
Parameters
-d Ps: Device Name
-r 0 : Set to Reset Mode (Default = Interrupt Mode)
-t Pd: Time in Milliseconds to Run Test (Default = 5000)
-v 0 : Enable Verbose Mode
Example
The following example indicates a typical display when using the testWatchdogTimer
command.
MOTLoad> testWatchdogTimer -d/dev/wdt0 -t1000 -v
See Also