Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 148)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 148
3.1.72 ping
Name
ping—broadcasts a generic network packet to a specified server (host).
Synopsis
ping -c [-d] [-n] [-p] [-r] -s [-t] [-s]
Parameters
-c Ps: Client IP Address
-d Ps: Device Name (Default =/dev/enet0)
-n Pd: Packet Count (Default = 1)
-p Pd: Packet-To-Packet Delay Count (Default - 1 Second)
-r Pd: Retry Count (Default = Forever)
-s Ps: Server (Host to Ping) IP Address
-t Pd: Time-Out Delay Count (Default = 10 Seconds)
-s Pd: Packet Size (Default = 128 Bytes/Octets)
Example
The following example indicates a typical display when using the ping commands.
MOTLoad> ping -c192.168.1.16.3 -s192.168.1.253
Client (Source) IP Address = 192.168.1.3
Server (Destination) IP Address = 192.168.1.253
Server/Host Found, E-Address = 00E04FD04940
170 (128+42) bytes from 192.168.1.253: icmp_seq=0 time=114216 us
Packets Transmitted =1, Packets Received =1, Packets Lost =0 (0%)
Round-Trip Min/Avg/Max = 114216/114216/114216 uS
Error Messages
pingHost(): illegal IP address
Invalid host/client IP address.
pingHost(): open() failed, errno =
Failed to open Ethernet device.