Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 17)

About this Manual
MOTLoad Firmware Package User’s Manual (6806800C24D) 17
June 2004  A Standard Error Codes and Devices section was added to Chapter 2.
 The following tests and commands were added to Chapter 3:
testThermoOp , testThermoQ , testThermoRange , csb csh csw and devShow .
 A note was added to all memory tests, for example, testRam , specifying
how the memory is tested.
 An error message field was added to applicable MOTLoad commands in
Chapter 3, MOTLoad Commands .
 A warning was added to testDisk about being destructive.
 The following commands were deleted from Chapter 3: mpuFork,
mpuShow, mpuSwitch, testFlash, testI2cRomRd, testI2cRomRdWr,
testUsbOscillator, and testUsbVok.
 A Reserved GEVs section was added to Appendix A.
 Auto boot instructions were added as an appendix, Appendix D, Auto Boot
July 2003 The MOTLoad prompt throughout this document was changed to a generic
MOTLoad>
from a specific product prompt, which will vary depending upon
which product was purchased.
Some command descriptions were modified and added to Chapter 3, as well
as corrections to font and text throughout to reflect more accurately screen
displays.
Date Change