Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 132)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 132
3.1.62 netBoot
Name
netBoot—performs various network boot functions.
Synopsis
netBoot
Boot File : [-a] [-e] -f [-l] [-o]
IP Address: [-b] [-c] [-g] [-m] [-s]
BOOT/RARP : [-p] [-u]
General : [-d] [-h] [-n] [-r] [-v] [-z]
Parameters
-a Ph: Boot File Load Address (Default=Dynamic/User Download Buffer)
-b Ps: Broadcast IP Address (Default=255.255.255.255)
-c Ps: Client IP Address (Default = 0.0.0.0.)
-d Ps: Device Name (Default=/dev/enet0)
-e Ph: Boot File Execution Address Offset (Default = 0)
-f Ps: Boot File Name
-g Ps: Gateway IP Address (Default = n.n.n.253)
-h 0 : Do Not Execute Loaded File
-l Ph: Boot File Length (Default = Entire File)
-m Ps: Subnet Mask (Default = 255.255.255.0)
-n 0 : Non-interactive mode
-o Ph: Boot File Offset (Default = 0)
-p 0 : BOOTP/RARP Request Force (Default = When Needed)
-r Pd: Retry Count (Default = Forever)
-s Ps: Server IP Address (Default = 0.0.0.0)
-u 0 : BOOTP/RARP Replay Configuration Update Disable (Default=Yes)
-v 0 : Verbose Mode
-z 0 : PReP Mode
Example
The following example indicates a typical display when using the netBoot commands.