109 testserialintloop, 109testserialintloop, Testserialintloop – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual

Page 197: Motload commands

Text mode
Original mode

MOTLoad Commands

MOTLoad Firmware Package User’s Manual (6806800C24D)

197

3.1.109 testSerialIntLoop

Name

testSerialIntLoop—validate the operation of the internal serial loopback path. This is a generic
serial internal loopback test application that does not require an external loopback connector.
The test application verifies the ability of a serial port device to send and receive random ASCII
characters to its internal registers.

Synopsis

testSerialIntLoop [-d] [-n] [-t] [-v]

Parameters

-d Ps: Device Name (Default = /dev/com2)

-n Pd: Number of Characters (Default = 8192)

-t Pd: RxD Time Out (Default = 30 seconds)

-v 0 : Enable Verbose Mode

Example

The following example indicates a typical display when using the testSerialIntLoop command.

MOTLoad> testSerialIntLoop -d/dev/com3