AMETEK SLM Series Rev B - Manual (Page 68)

GPIB/RS-232 Programming Operation SLM-Series AC/DC Electronic Load
4-26 M540072-01 Rev B
SYNCHRONOUS ON/OFF
Purpose:
To read the setting condition of SYNC.
Command Syntax:
SLM AC Modules:
SYNC?{;|NL}
Description:
SYNC? Reada back the condition of SYNC. “0” denotes OFF, “1” denotes ON.
SENSE ON/OFF
Purpose:
To read the setting condition of Sense ON or OFF.
Command Syntax:
All Modules:
SENS?{;|NL}
Description:
SENS? Reads back the setting condition of SENS. “0” denotes OFF, “1” denotes ON.
WATT Meter ON/OFF
Purpose:
To read the setting condition of WATT.
Command Syntax:
SLM Modules:
WATT?{;|NL}
Description:
WATT? Reads back the setting condition of WATT. “0” denotes OFF, “1” denotes ON.
WAVEFORM BANK
Purpose:
To read the set value of BANK
Command Syntax:
SLM AC Modules:
BANK?{;|NL}
Description:
BANK? Reads back the set value of BANK. 0-10 denotes waveform bank of level 0-10.
WAVEFORM
Purpose:
To read the set value of WAVE.
Command Syntax:
SLM AC Modules:
WAVE?{;|NL}
Description:
WAVE? Reads back the set value of WAVE. 1-5 denotes the C.F. setting of level 1-level 5.