AMETEK SLM Series Rev B - Manual (Page 35)

SLM-Series AC/DC Electronic Load Operation
M540072-01 Rev B 3-9
Set
G/NG VA
Limits
LIMIT
Set
G/NG Voltage
Limits
Set
G/NG Current
Limits
Set
G/NG Power
Limits
LED ON: V RMS , LIMIT
Upper 4½-digit: Upper
Limit Setting
Lower 4½-digit: Lower
Limit Setting
LED ON: W, LIMIT
Upper 4½-digit: Upper
Limit Setting
Lower 4½-digit: Lower
Limit Setting
LED ON: A RMS , LIMIT
Upper 4½-digit: Upper
Limit Setting
Lower 4½-digit: Lower
Limit Setting
LED ON: VA, LIMIT
Upper 4½-digit: Upper
Limit Setting
Lower 4½-digit: Lower
Limit Setting
LEDs ON: SENSE
DESCRIPTION DISPLAY CONTROL
Sets upper limit
↑↓
Sets lower limit
Sets upper limit
↑↓ Sets lower limit
Sets upper limit
↑↓
Sets lower limit
↑↓
Any setting button
toggles sense on/off
Sets upper limit
↑↓
Sets lower limit
SENSE
FREQ
↑↓
Course/fine setting
↑ ↓
High Bank# / Lower
Bank#
Set SYNC source
ON=External
OFF=Input Terminal
or Vsense
Set BANK Number
for Crest Factor
Waveform
↑↓
Any button
toggles on/off
LED ON: FREQ
Upper 4½-digit: "FrEq"
Lower 4½-digit: dc,
frequency setting, auto
Set frequency.
MIN=dc,
Max.=Auto
Setup Complete
LED ON: FREQ
Upper 4½-digit: "bAn"
Lower 4½-digit: Bank
number setting 0-10
LED ON: FREQ
Upper 4½-digit: "Sync"
Lower 4½-digit: On/off
WATT
LED ON: WATT
Upper 4½-digit: "W"
Lower 4½-digit: "VA"
↑↓
Any button
toggles on/off
Figure 3-4 SLM-Series AC/DC Electronic Load Module Setup Flow Chart