AMETEK SLM Series Rev B - Manual (Page 34)

Operation SLM-Series AC/DC Electronic Load
3-8 M540072-01 Rev B
5. Press the “FREQ” key two times to exit setting mode.
6. Press the appropriate √2, 2.0, 2.5, 3.0 and 3.5 keys to select the desired
crest factor. The associated LED will light.
3.2.5 Display Setting
In normal operation, the DMs display RMS voltage and RMS current.
• To display power in Watts (upper DM) and VA (lower DM), press the “WATT”
key until the associated LED (W or VA) is lit.
• To return to normal display mode, press the “WATT” key again.