AMETEK SLM Series Rev B - Manual (Page 21)

SLM-Series AC/DC Load Features, Functions, and Specifications
M540072-01 Rev B 1-5
1.2 FEATURES AND FUNCTIONS
• Modular design facilitates fast and flexible install/uninstall procedures
• Interface function of full GPIB control, including setting of load condition and read-
back of Vmeter and Ameter
• Software calibration ability
• Dual High Accuracy/High Resolution 4 ½ -digit Vmeter and Ameter
• In CC mode, frequency width can reach to 70Hz with the set table range of 1KHz
• In CC mode, the settable Crest Factor can be set to Maximum 3.5
• Isolated Current Monitor BNC output with full scale of 10V
• Automatic judging ability for GO/NG
• Switchable automatic voltage sensing ability.
• Protection functions include Over-Voltage, Over-Current, Over-Power and Over-
Temperature
• Cooling fan control device with revolution change function
1.3 ACCESSORIES
• Vsense Input BNC Connector 1 EA
• Banana Terminal (Black) 1 EA
• Banana Terminal (Red) 1 EA
• Hook-Type Terminal 2 EA
• SLM-Series AC/DC Electronic Load Operation and Programming
Manual (this manual) 1 EA