AMETEK SLH Series RevB - Manual (Page 76)

Appendix D Sorensen SLH-Series AC High Power Electronic Load
D-6 M540073-01 Rev C
D.3.2 OPTIONAL INSTALLATION
System Cabinet Dimensions
The industrial standard 19” wide system cabinet can be used for the high power electronic
load; the minimum recommended width and depth of a cabinet are 21.65 inches by 23.6
inches (Figure 4). Allocate 4U high (7” / 177mm) for each load unit in the system cabinet.
No vertical space is required between load units, because the airflow for cooling travels
from front to back, exiting through the rear panel of each unit. Allocate 185 CFM per unit
for airflow.
Figure 4