AMETEK RS Series - Manual (Page 24)

User Manual AMETEK Programmable Power
RS Series 24
2.6.1 -HV Option Specifications
The -HV option provides an AC only output range of 0 to 400 Vac L-N. Specifications unique to
the -HV option are shown in the table below.
Output Parameter RS90 RS180 RS270 RS360 RS450 RS540
Modes
Pi Controller AC
Voltage:
Ranges (L-N): 0 -400 V
Resolution: 0.1 V
Accuracy: ± 0.25% of Full Scale / ± 1.0 Vac rms
Output Coupling AC coupled
Power (total power for all phases, either range, at full scale voltage)
AC Mode 90 KVA 180 KVA 270 KVA 360 KVA 450 KVA 540 KVA
Current
Note: Current, maximum amps per phase available between 50 and 100 % of voltage range.
75 A 150 A 225 A 300 A 375 A 450 A
Peak Current
AC Mode 225 A 450 A 675 A 900 A 1125 A 1350 A
Frequency:
Range: 45 Hz – 819 Hz
with –LF option: 45 Hz – 500 Hz
with –HF option: 45 Hz – 905 Hz (see also –HF option specification.)