Adtec digital RD-70 (version 1.02.04) Manual - Manual (Page 63)

GPIO Port
Use: not used as this time
Connector: DB9 Male
Video and Audio
Video Decode
MPEG-2 SD (ISO/IEC 13818-2) Decode:
Format: 480i59.94, 576i50
Profiles: MP@ML, SP@ML, 422P@ML
MPEG-2 HD (ISO/IEC 13818-2) Decode:
Format: 720p50, 720p59.94, 1080i50, 1080i59.94
Profiles: 422P@HL, MP@H14L, MP@HL, SP@H14L, SP@HL
MPEG-4 SD (ISO/IEC 14496-10) Decode:
Format: 480i59.94, 576i50
Profiles: Baseline, Main (support 8 bits only)
MPEG-4 HD (ISO/IEC 14496-10) Decode:
Format: 720p50, 720p59.94, 1080i50, 1080i59.94, 1080p50, 1080p59.94
Profiles: High, High422 (support 8 bit and 10 bit)
Max Level: 4.1-4.2 (CABAC:50Mbps, CAVLC:150Mbps)
Supported tools support Baseline except ASO, FMO
Audio Decode
MPEG 1 Layer 2 audio (8 pairs)
AAC-LC Stereo and Surround Decode (2 sets of 3 pairs) *requires feature key
Dolby Digital AC3 stereo downmix (8 pairs) *requires feature key
Audio Pass-through
Supports up to two Dolby-E 16/20 bit, Dolby Digital AC3 16 bit, and/or Linear PCM 16/20/24 bit pass-
through sessions. 24 bit input samples are truncated to 20 bits. Each SDI output contains all active
pass-through sessions.
Physical and Operational
Physical / Environmental
1 RU - 18D X 19W X 1.65H
Weight – 9-14lbs. Dependent on RF Option
Power
Input Voltage: 100VAC - 240VAC 50/60Hz
Operational
- Ambient operating temperature: -20C to 40C.
- Ambient storage temperature: -30C to 80C.
- Non-condensing relative humidity range: 30% to 85%