Adtec digital RD-70 (version 1.02.04) Manual - Manual (Page 35)

this time.
x3 ASI OUT x3 75 Ohm BNC ASI output per EN5000839
Sync In Standard analog video sync separation for NTSC, PAL, 480I/P,
576I/P, 720P, and 1080I/P/PsF from Composite Video (CVBS). Bi-
level & tri-level sync compatible. BNC
CVBS Out 75 Ohm BNC Standard Definition Composite Video Output
Digital Video Video Output
SDI Out Banks x4 Outputs from decoder: Video/Audio/VBI (SMPTE 259M-C - SD,
SMPTE 292M - HD, SMPTE 424M - 3G).
SDI Bank A = x2 SD/HD/3G-SDI BNC Outputs
SDIALT Bank B = x1 SFP(for Optical SFP connector) SD/HD/3G-SDI
Output and x1 SD/HD/3G-SDI BNC.
note*: 3G-SDI Outputs have selectable Level A and Level B Dual
Link output control to retain interoperability with other third party
3G devices. The default mapping level is Level A.
Demodulator
(Optional)
RF 1 & 2 x2 RF Input, 75 Ohm F-Connector
DB9-M Analog audio output pinout
PIN Designation Function
1 NC No Connect
2 GND Ground
3 L+ Left +
4 R+ Right +
5 GND Ground
6 NC No Connect
7 GND Ground
8 L- Left -
9 R- Right -