Adtec digital RD-70 (version 1.02.04) Manual - Manual (Page 62)

SDI Ancillary data and OSD overlay have unique configuration for each SDI bank
Connector: Three BNC (75 Ohm), One SFP
note*: 3G-SDI Outputs have selectable Level A and Level B Dual Link output control to
retain interoperability with other third party 3G devices. The default mapping level is Level
A.
CVBS
SD NTSC or PAL D1 Composite Video Output (downscaled from HD source)
Supports Closed Captioning and Teletext
Connector: BNC (75 Ohm)
DVB-ASI
Standard: Asynchronous Serial Interface per EN500083-9
ASI Mirrored from DVB-ASI Input, IP Input, or RF Input with purchase of optional tuner package. All
streams are output as 188 byte packets.
Connector: Three BNC (75 Ohm)
AES Audio
Standard: AES3
8 pairs of decoded audio
Connector: Eight BNC (75 Ohm)
Analog Audio
Two balanced pairs via DB9 connector. (1 pair per DB9)
+18dBu nominal clipping level, -40 to +18dBu selectable.
Connector: Two DB9 (600 Ohm)
Communications
COM2 Serial Port
Use: API Serial Communication Interface
Default Baud Configuration: 38,400bps 8 data bits 1 stop bit no parity
Connector: 8 pin RJ45
COM1 Serial Port
Use: Serial Port Used for Troubleshooting (Terminal)
Connector: 8 pin RJ45 (supplied with DB9 to RJ45 adapter)
Baud Configuration: 115,200 bps 8 data bits 1 stop bit no parity
Ethernet Port
Use: ethernet port used for network control, but can be used for IP receive
Format: Ethernet 10/100BaseT
Communication Methods: WebUI, SNMP, Telnet, XCP
Connector: 8 pin RJ45
DB9 Parallel Port
Use: DB9 parallel port used for custom triggering / integration
Connector: DB9 Male