Adtec digital EN-30 (version 1.02.02) Manual - Manual (Page 55)

Frequency: 50 - 180MHz
Connector: BNC (50Ohm)
L-Band Output
Output level: -35 to +5dBm (+/- 2dB)
Frequency: 950 - 2150MHz
Connector: BNC (50Ohm)
L-Band Monitor Output
Output level: -45 dBm (+/- 5 dB)
Frequency: Follows L-Band main output or fixed at 1050 MHz when IF output active.
Connector: BNC (50Ohm)
note*: When IF is selected, monitor will be fixed at 1080MHz in future firmware update.
Reference Input
Level: -3 to +7 dBm
Frequency: 10 MHz
Connector: BNC (50Ohm)
Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2013
Adtec Digital. EN-30 is a trademark of Adtec Digital. Other product and company names may be
trademarks or registered trademarks of their respective companies. This information may not, in
whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic
medium or machine-readable form without prior consent in writing from Adtec Digital.