Adtec digital EN-30 (version 1.02.02) Manual - Manual (Page 26)

Save Saves the currently running configuration into a file
stored on the unit. Press , then use
up/down/left/right arrows to name a profile. Press
to save the current profile name.*.SYSD PROFILEDeleteDeletes previously saved files from stored memory.
Press , then use up/down arrows to browse
through profile names. Press to delete
selected profile *.SYSD PROFILE
Delete Deletes previously saved files from stored memory.
Press *. SYSD PROFILE
CAS Menu
The following diagram illustrates the structure and flow of the CAS Menu on the Adtec EN-
30 device:
Control Function Options API Command
Channel 1 Turns Service 1
Encryption ON/OFF ON
OFF *.ECMD0 ECR
Channel 2 Turns Service 2
Encryption ON/OFF ON
OFF *.ECMD1 ECR
Mode Determines whether the
encoder will pass the
transport stream through
the Encryption Block.
Only one encryption
mode is supported at a
time ( BISS1 or BISSE ),
but each channel has
individual control. OFF
BISS_1
BISS_E_USER_ID_ONE
BISS_E_USER_ID_TWO *.ECMD# ECR
Clear SW 12-digit hexadecimal
Clear Session Word used
with BISS1 CSW *.ECMD0 ECR CSW [key]
Encrypt SW 16-digit hexadecimal
Encrypted Session Word
used with BISSE ESW *. ECMD0 ECR ESW [key]
User ID 1 14-digit hexadecimal user
id 1 used with BISSE AID1 *.ECMD0 ECR AID1 [key]
User ID 2 14-digit hexadecimal user
id 2 used with BISSE AID2 *.ECMD0 ECR AID2 [key]