Adtec digital EN-30 (version 1.02.02) Manual - Manual (Page 28)

Using the and arrows, select the value you wish.
Press to save your selection
Network Sub Menu
Item Function Options
Ethernet IP Address This is the address of your device
on your network specific to the
Ethernet Port.
user-defined using the numeric
keypad
Default is 192.168.10.48
Ethernet IP Mask Defines the unit relative to the
rest of your network.
user-defined using the numeric
keypad
Default is 255.255.255.0
Ethernet DHCP The Dynamic Host Configuration
Protocol allows your device to
self-locate network Ethernet
parameters.
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
Default is OFF
GIGE IP Address This is the address of your device
on your network specific to the
GigE Port.
user-defined using the numeric
keypad
Default is 192.168.20.48
GIGE IP Mask Defines the unit relative to the
rest of your network.
user-defined using the numeric
keypad
Default is 255.255.255.0
GIGE DHCP The Dynamic Host Configuration
Protocol allows your device to
self-locate network GigE
parameters.
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
Default is OFF
Gateway IP Address The gateway is a routing
mechanism that passes traffic
between different subnets and
networks.
user-defined using the numeric
keypad
Default is 192.168.10.1
Stealth IP Address This is a security feature that
allows only the designated
Stealth IP Address to
communicate with the unit for
FTP and other services. This
control allows one-point override
access to the Stealth IP Address.
user-defined using the numeric
keypad
Default is 0.0.0.0. Using all 0s
effectively turns this function
off.