Adtec digital EN-30 (version 1.02.02) Manual - Manual (Page 53)

MPEG1 Layer 2 encode
AAC encode (LC 2.0/6.0, HEv1 2.0/5.1, HEv2 2.0)
Dolby E passthrough
Dolby Digital 2.0/5.1 (AC3) passthrough
Linear PCM passthrough
Analog Digital/Closed Captions/ VBI VANC
Waveform or Analog (Composite or SD-SDI):
Connector: RCA jack 75 Ohm Terminated Input
Closed Captions per CEA-608-C (2005), Closed Captions per DVS-157, Wide Screen
Signaling (WSS) per ETSI EN300294 V1.4.1 (2003-04), Teletext per ETSI EN 300 472
V1.3.1 (2003-05)
Ancillary (ANC) per SMPTE 291M (Native via SD/HD-SDI):
Connector: BNC 75 Ohm Terminated Input for HD/SD-SDI
Closed Captions per CEA-708 (SMPTE 291M), Teletext per OP47 and SMPTE 2031, VITC per
SMPTE 2038, EBU Teletext/Subtitles, WSS/Teletext/NABTS/CEA-608/TV2GX/AMOL48/96,
User Defined (2031-2007) per SMPTE 2031, AFD/Bar Data/Pan Scan per CEA-CEB16 (2006)
per SMPTE 2016
Waveform Bridging and Conversion of Video User Data
Connector: BNC 75 Ohm Terminated Input
CEA 608 to CEA 708 up-conversion
Caption Bridging: CEA-608 via Composite merged with SD or HD Video via SDI (Similar
frame rates required)
Teletext Bridging: Waveform Teletext via Composite merged with SD or HD Video via SDI
WSS Bridging: Waveform WSS via Composite merged with SD Video via SDI
Transport Stream User Data Carriage
SCTE 127-2007, ETSI EN 301 775, v1.2.1 (2003-05)
Emergency Alert System (EAS) Input:
EAS Video:
Connector: RCA jack 75Ohm
Interface: Terminated NTSC or PAL D1 Composite Input with loop
EAS Audio:
Connector: Vertical single RCA jack
Interface: mono audio channel with loop
EAS Triggering Interface:
GPI
Web UI
XCP