Adtec digital EN-30 (version 1.02.02) Manual User Manual
Page 18

Interface
Rate
The Interface Rate is the bit
rate at the baseband
interface.
Range can be determined by feature key.
Carrier Mode The Carrier Mode control
allows the operator to select
ON for normal operations or
select one of four
unmodulated carriers. The
Pure Carrier option will
provide an un-modulated
output carrier at the desired
frequency and output
power. Other Carrier Mode
options include Clock
4/8/16.
Pure Carrier
On
Clock/8
Clock/4
Clock/16
10MHz Clock
Allows operator to generate
or pass a 10MHz signal.
The signal can be generated
internally or sourced
externally.
*** This is a special order
option. If your unit does
not have the functionality
the setting will read “N/A”
OFF
ON
EXTERNAL
10 MHz
Clock
Combined
Allows the operator to
choose whether or not to
combine the 10MHz signal
with the L-Band output.
*** This is a special order
option. If your unit does
not have the functionality
the setting will read “N/A”
UNCOMBINED
COMBINED
MODULATOR
LINEUP
This feature enables the
operator to quickly view
and/or configure select
modulator RF output
parameters.
Carrier Mode:
PURE_CARRIER or MODULATED
Transmit:
ENABLED or DISABLED
Output Power:
User defined in 0.5dB incr.
Output Frequency:
User defined in 1.0MHz incr.