WaveWare CommTech MaxPage - Manual (Page 69)

Manual MAXPage
© Commtech Wireless Page 69
6.4.2 PBX
• The Answer Rings field refers to the number of rings that MAXPage will wait before
answering a Telephone call made to it.
• The Prompt Delay field refers to the time delay (in seconds) before the voice prompt
is heard, once a call is made to the MAXPage Telephone interface.
• The Inactivity Time field refers to the timeout of an active call if no input is made (in
seconds).
• The Msgs. Before Disconnect field refers to the number of messages that can be sent
per call to the MAXPage unit.
• The Voice paging timeout field refers to the length that a two-tone voice page is
limited to over the Telephone interface (in seconds).
™ NOTE: For information on how to operate the Telephone (PBX) system, refer to
“Ports -> PBX” within the Config Mode section above.