WaveWare CommTech MaxPage - Manual (Page 18)

MAXPage Manual
Page 18 © Commtech Wireless
PBX Interface
If you wish to use the Telephone interface (a.k.a. PBX interface), run a cable from a spare
PBX extension or phone line to the connector shown in the diagram below. Make note of the
extension or phone number MAXPage is connected to. The customers will need to be told
which extension or phone number to dial in order to reach the unit.
3.3 Interference to Telephones, PBXs’ and other electronic equipment
The transmitter in MAXPage has a significant power output and when transmitting it may
cause interference to other electronic equipment.
For Audio equipment such as Wired Telephones, Cordless Telephones, Private Branch
Exchange (PBX) systems, Audio / Visual entertainment systems and Radio Communications
equipment, the interference may cause the following:
• An increase in the level of background noise whilst the MAXPage is transmitting
• Loss of Audio whilst the MAXPage is transmitting
In general, all electronic equipment may exhibit the following behaviour if subjected to
interference.
• Temporary aberrations in operation, e.g. screen flicker.
• Malfunctions requiring the user to switch off and on the equipment to recover.
• Malfunctions requiring the equipment to be serviced.
The following rules apply to the installation of MAXPage in order to address interference
1. Keep other equipment and their power supplies at least 1 meter away from the
MAXPage’s antenna.