WaveWare CommTech MaxPage - Manual (Page 14)

MAXPage Manual
Page 14 © Commtech Wireless
3. ASSEMBLY AND INSTALLATION
Assemble the components supplied with MAXPage unit as follows:
3.1 Required Components
Antenna
Attach the right angle BNC adapter to the quarter wave whip antenna. Screw the
quarter wave whip antenna onto the BNC transmitter connector located on the rear
panel of the MAXPage unit.
Power Adapter
Plug the power adapter into mains power. Ensure the power switch on the back of the
MAXPage unit is in the off position. Plug the power adapter into the power connector
on the rear panel of MAXPage.