Signamax Model -065-7700 - Manual (Page 32)

Hardened Managed PoE Ethernet Switch
User’s Manual 31
SNMP & RMON Management
This chapter describes the switch’s Simple Network
Management Protocol (SNMP) and Remote Monitoring
(RMON) capabilities.
Overview
RMON is an abbreviation for the Remote Monitoring MIB
(Management Information Base). RMON is a system defined
by the Internet Engineering Task Force (IETF) document RFC
2819, which defines how networks can be monitored
remotely.
RMONs typically consist of two components: an RMON probe
and a management workstation:
- The RMON probe is an intelligent device or software agent that continually
collects statistics about a LAN segment or VLAN. The RMON probe
transfers the collected data to a management workstation on request or
when a pre-defined threshold is reached.
- The management workstation collects the statistics that the RMON probe
gathers. The workstation can reside on the same network as the probe, or it
can have an in-band or out-of-band connection to the probe.
The switch provides RMON capabilities that allow network
administrators to set parameters and view statistical counters
defined in MIB-II, Bridge MIB, and RMON MIB. RMON
activities are performed at a Network Management Station
running an SNMP network management application with
graphical user interface.