Signamax Model -065-7700 - Manual (Page 119)

Hardened Managed PoE Ethernet Switch
User’s Manual 118
Load config to TFTP server:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2.
Usage:
Use write config-file command to backup configuration file to tftp server.
3.
Command Syntax:
write config-file IP-ADDRESS
IP-ADDRESS specifies the IP address of tftp server.
4.
Example:
The following example backups configuration file to tftp server (IP address:
192.168.1.20):
switch_a#write config-file 192.168.1.20
switch_a#
Save Configuration:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2.
Usage:
Use copy running-config startup-config command to write configurations
to the file to be used at startup. This is the same as the write memory
command.
3.
Command Syntax:
copy running-config startup-config
4.
Example:
The following example specifies writing configurations to the file to be used at
startup to switch:
switch_a#copy running-config startup-config
switch_a#
Restore Default:
1.
Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#