Signamax Model -065-7700 - Manual (Page 171)

Hardened Managed PoE Ethernet Switch
User’s Manual 170
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode, MD5 or
SHA authentication, and privacy. Use the no form of the command to delete
this user.
3.
Command Syntax:
(no) snmp-server v3-user USERNAME (ro ｜ rw) priv auth (md5 ｜ sha)
AUTH_PASSWORD des PRIV_PASS_PHRASE
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
PRIV_PASS_PHRASE encryption pass phrase
4.
Example:
The following example adds a user (myuser) using snmp v3 with read-write
access mode, MD5 authentication (mypassword), and encryption pass
phrase (mypassphrase):
switch_a(config)#snmp-server v3-user myuser rw priv md5 mypassword
des mypassphrase
switch_a(config)#