Signamax Model -065-7700 - Manual (Page 16)

Hardened Managed PoE Ethernet Switch
User’s Manual 15
Product Highlights
Basic Features
 Meets NEMA TS1/TS2 Environmental requirements such as
temperature, shock, and vibration for traffic control equipment.
 Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity
for industrial environment.
 RS-232 console, Telnet, SNMP v1 & v2c & v3, RMON, Web Browser,
and TFTP management.
 Supports Command Line Interface in RS-232 console.
 Supports 8192 MAC addresses. Provides 2M bits memory buffer.
 Port 1 ~ Port 4 support IEEE802.3at Power over Ethernet (PoE) Power
Sourcing Equipment (PSE) and/or Port 5 ~ Port 8 support IEEE802.3af
Power over Ethernet (PoE) Power Sourcing Equipment (PSE).
 Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation,
1000Mbps-full-duplex, 10/100Mbps-full/half-duplex, Auto MDI/MDIX.
 100BaseFX: Multi mode or Single mode duplex LC type. 100BaseBX:
WDM Multi mode or Single mode single LC type.
 1000BaseSX/LX: Multi mode or Single mode duplex LC type.
1000BaseBX: WDM Multi mode or Single mode single LC type.
 Store-and-forward mechanism. Full wire-speed forwarding rate.
 Alarms for power and port link failure by relay output.
 Power Supply: Redundant 47-57VDC Terminal Block power inputs or
47-57VDC DC Jack power input.
 Field Wiring Terminal: Use Copper Conductors Only, 60/75℃, 12-24
AWG torque value 7 lb-in.
 Operating voltage and Max. current consumption: 0.31A @ 48VDC.
Power consumption: Power consumption: 230W Max. (Full load with
PoE), 15W Max. (Without PoE).
 -40℃ to 75℃ (-40℉ to 167℉) operating temperature range. Tested for
functional operation @ -40℃ to 85℃ (-40℉ to 185℉). UL508
Industrial Control Equipment certified Maximum Surrounding Air
Temperature @ 75℃ (167℉).
 For use in Pollution Degree 2 Environment.