Paxton Superchargers Ford Mustang GT User Manual

Page 70

P/N: 4809654 v5.0

A. Reinstall the factory passenger’s side upper

radiator hose removed in a previous step.

B. Reinstall the factory coolant reservoir using

factory hardware to secure.

C. Reattach the large hose at the bottom of the res-

ervoir to the thermostat housing using the facto-

ry hose clamp.

D. Reconnect the small overflow hose at the top

using the factory clamps.

E. Check all cooling system hose connections to

make sure they are secured with the appropriate

hose clamps.

F. Refill the cooling system using the previously

drained coolant.

F. Once the cooling system is filled and all

trapped air expelled, install the 1/8"NPT plug

provided in the previously installed cross-over

tube. Thread sealant should be used.

10. CooLANT RESERvoiR

RE-iNSTALLATioN

(Non-cooled kits only)

Section 9

AIR DISCHARGE ASSEMBLY INSTALLATION

(NON-COOLED KITS ONLY)