Paxton Superchargers Ford Mustang GT - Manual (Page 50)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
30
5. Attach a length of 5/32" vacuum hose to
bypass valve #2 and route to the vacuum
port of the fuel rail sensor.
6. Cut a section of the factory hose and
install the vacuum TEE that is provided.
(See Fig. 8D-b.)
7. Attach the vacuum hose from the bypass
valve to the TEE.
8. Attach a length of 5/32" vacuum hose to
the previously installed bypass valve #1.
Connect the open end to the previously
installed vacuum line running to the fuel
rail from bypass #2 using the TEE provid-
ed. (See Fig. 8D-c.)
Fig. 8D-b
VACUUM
TEE
VACUUM
HOSE
8D. CoMPRESSoR ByPASS vALvE #2
ASSEMBLy iNSTALLATioN (2005-2006
H.o. kits only), cont’d