Paxton Superchargers Ford Mustang GT - Manual (Page 61)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
41
4. Locate and install 1/4"NPT x 3/8" barbed
fitting in the tapped hole just above the
previously installed mounting bracket. This
hole may have to be opened using the
appropriate drill bit. (See Fig. 8K-c.)
Fig. 8K-c
Fig. 8K-b
Fig. 8K-a
8k. ENGiNE CooLANT RESERvoiR
iNSTALLATioN (2005-2006 Model H.o. kits
only)
1. Locate assembly 8N155-080.
2. Attach the rear reservoir mounting bracket
4FU010-051 to the reservoir with the 1/4-
20 x 3/4" long bolts and washers provided.
(See Fig. 8K-a.)
3. Attach bracket 4FU010-061 to the front of
the reservoir with the hardware provided.
(See Fig. 8K-b.)
BRACKET
3/8"
BARBED
FITTING
*** NOTE ***
2007-2010 Models skip to 8L