Paxton Superchargers Ford Mustang GT User Manual

Page 45

P/N: 4809654 v5.0

8A. BUMPER CovER & SPLASH PAN

REMovAL

(H.o. kits only), cont’d

Fig. 8A-i

Fig. 8A-j

Fig. 8A-k

13mm HEADED

BOLTS

NYLON PUSH

PINS

15. Remove four inner bolts of eight 13mm

headed bolts retaining the metal bumper

support. (See Fig. 8A-k.)

14. Remove four nylon push pins from the

styrofoam bumper support and set the

support and the pins aside to be rein-

stalled. (See Fig. 8A-j.)

Fig. 8A-l

SPACERS

PROVIDED

18. Replace the styrofoam bumper support using

the factory retainers.

AIR DIVERSION

PANELS

16. Replace the bolts previously removed with

the four 8mm-1.25" x 35mm long bolts

and washers provided.

17. Install the four 2A017-036 spacers (two

each side) to the bolts. (See Fig. 8A-l).