Paxton Superchargers Ford Mustang GT User Manual

Page 60

P/N: 4809654 v5.0

Fig. 8J-c

2. Detach the wiring harness from the retain-

ing clips and move the harness to the

shock tower. Secure the harness to the A/C

line with wire ties. (See Fig. 8J-b.)

3. Remove the small clip retaining the small

wiring harness to the shock tower. (See

Fig. 8J-b.)

4. Attach the small harness to the large har-

ness with wire ties.

5. To gain clearance for the coolant reservoir

the A/C line will need to be bent slightly

towards the passenger’s side fender. (See

Fig. 8J-b.)

6. Remove the 10mm headed screw retaining

the ground strap to the bracket on the strut

tower. (See Fig. 8J-c.)

Fig. 8J-b

8J. WiRiNG HARNESS RELoCATioN (H.o.

kits only)
1. On the passenger’s side of the engine,

attached to the valve cover, is a large wire

harness. The harness will have to be relo-

cated to gain clearance for the radiator

overflow reservoir. (See Fig. 8J-a.)

Fig. 8J-a

SECURE

HARNESS

WITH WIRE-TIES

BENT A/C LINE