NEXCOM OPPC 1520T - Manual (Page 97)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 82
Chapter 4: BIOS Setup
OPPC 1520T/1720T User Manual
Boot
Boot Settings Configuration
This section is used to configure settings during system boot.
Boot Device Priority
This section is used to select the boot priority sequence of the devices.
Removable Drives
This section is used to select the boot priority sequence of the hard disk
drives.
Configure settings
during system boot.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings
u Boot Settings Configuration
u Boot Device Priority
u Removable Drives
Boot Settings Configuration
This section is used to configure settings during system boot.
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Configuration
Quick Boot [Enabled]
Quiet Boot [Disabled]
Bootup Num-Lock [On]
PS/2 Mouse Support [Enabled]
System Keyboard [Present]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Boot
Quick Boot
When Enabled, the BIOS will shorten or skip some check items during
POST. This will decrease the time needed to boot the system.
Exit PCIPnP Advanced Boot Chipset Main Security