Advanced – NEXCOM OPPC 1520T User Manual
Page 87
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
72
Chapter 4: BIOS Setup
OPPC 1520T/1720T User Manual
Advanced
The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunc-
tion.
IDE Configuration
This section is used to configure the IDE drives.
USB Configuration
This section is used to configure USB devices.
ACPI Configuration
This section is used to configure the ACPI function.
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Hardware Health Configuration
This section is used to configure the hardware monitoring events such as
the temperature, fan speed and voltages.
Onboard LAN 1 and Onboard LAN 2
Enables or disables the onboard LAN.
LAN Boot ROM
Enable this field if you want to use the boot ROM (instead of a disk drive)
to boot-up the system and access the local area network directly. If you
wish to change the boot ROM’s settings, type the
simultaneously when prompted during boot-up. Take note: you will be
able to access the boot ROM’s program (by typing
when this field is enabled.
Configure the IDE
devices(s).
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
Advanced Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
u
IDE Configuration
u
USB Configuration
u
ACPI Configuration
u
SuperIO Configuration
u
Hardware Health Configuration
Onboard LAN 1
[Enabled]
Onboard LAN 2
[Enabled]
LAN Boot ROM
[Disabled]
LVDS Mode Configuration [Mode 2]
Exit
PCIPnP
Advanced
Boot
Chipset
Main
Security