Panel mount kit (optional) – NEXCOM OPPC 1520T User Manual

Page 79

Text mode
Original mode

Chapter 3: System Setup

OPPC 1520T/1720T User Manual

2. Position the mounting clamps along the rear edges of the Panel PC.

The first and second clamps must be positioned and secured diagonally
prior to mounting the rest of the clamps. Tighten the clamp’s screw
until it touches the panel. Do not overtighten the screws to prevent
damaging the Panel PC.

Panel Mount Kit (Optional)

1. The optional mounting clamps must be attached along the rear edges

of the Panel PC.

Clamp

Panel

OPPC 1720T

OPPC 1520T

This manual is related to the following products:

OPPC 1720T