NEXCOM OPPC 1520T User Manual
Page 101
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
86
Chapter 4: BIOS Setup
OPPC 1520T/1720T User Manual
South Bridge Configuration
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions
[10 USB Ports]
USB 2.0 Controller
[Enabled]
HDA Controller
[Enabled]
SMBUS Controller
[Enabled]
Restore on AC Power Loss
[Power Off]
Power Type
[ATX]
PCIE Ports Configuration
Mini PCIE Port1
[Auto]
Mini PCIE Port2
[Auto]
Chipset
USB Functions
Enables or disables the selected USB ports. The options are 2 USB Ports,
4 USB Ports, 6 USB Ports, 8 USB Ports and 10 USB Ports.
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller Inter-
face controller.
HDA Controller
Enables or disables the onboard audio.
SMBUS Controller
Enables or disables the SMBUS controller.
Restore On AC Power Loss
Power Off When power returns after an AC power failure, the system’s
power is off. You must press the Power button to power-on
the system.
Power On When power returns after an AC power failure, the system will
automatically power-on.
Last State When power returns after an AC power failure, the system
will return to the state where you left off before power failure
occurs. If the system’s power is off when AC power failure
occurs, it will remain off when power returns. If the system’s
power is on when AC power failure occurs, the system will
power-on when power returns.
Power Type
Selects the type of power supply. The options are AT and ATX.
Mini PCIE Port1 and Mini PCIE Port2
Configures the Mini PCIE ports.
Options
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports